29.5.2015

Laivavene...Pram for the big boat !!

Isoveneen veiston edetessä hyvää vauhtia aloitimme toisenkin veneprojektin...Laivavene !! Kyllä jokaisella laivalla täytyy olla pieni, kaunis jolla. 

Laivaveneemme suunnittelun perusta oli seuraavat asiat:

- Perinteinen
- Hyvä soutaa
- Kevyt
- Pitää mahtua Isoveneen avotilan lattialle tarvittaessa
- Kaunis

Veneenveistäjät Risto & Esa ryhtyivät tuumasta toimeen ja löysivät piirustukset 7 1/2 jalkaiselle jollalle joka täyttää ylläolevat kriteerit mainiosti.




As the building process of the hull of the big boat is nearing completion we started another, interesting program...a Launch for the big boat !! Every sailing ship must have its' launch and ours is no different so we started to look into a design that could fulfill our wish list:

- Traditional design
- Easy to row
- Lightweight
- Must be able to fit onto the floorspace between the cabins of the big boat
- Beautiful

The boatbuilders Risto & Esa found a design that is just about perfect. It is a 7 1/2 foot Pram.
----------------------------------------------------------------------------------------------------------------------------------

Materiaaliksi tähän jollaan valittiin suomalainen uutuustuote Vendia-wood joka on vanerintapainen laminoitu tuote. 

Tämä soveltuu erinomaisesti käyttötarkoitukseemme ja on samalla helppohoitoisempi vaikka sitä pidettäisiin pitkiäkin aikoja poissa vedestä.

www.vendia.fi  
--------------------------------------------------------------------------------------------------------------------

We decided to use a new, laminated boat-blank product called Vendia-wood. This is perfect since it allows us to keep the boat out of the water for longer periods of time without having to worry about it drying. 

You can find more about this product at www.vendia.fi

In order to make the building process easy and ergonomic a special, elevated jig was built.





Veneerakennus aloitettiin kölilinjasta ja ergonomisella korkeudella olevasta jigistä. Seuraavaksi asennettiin polviot keula- ja peräpeilille jonka jälkeen laitettiin mallikaari paikalleen.

The location of the bow and stern was measured and the temporary frame was put in place.







Vendia-puuta voi tilata tarkoitukseen soveltuvalla mitoituksella ja meidän tapauksessa mitta valittiin siten että jokainen runkolauta tehdään yhdestä palasta ja lautoja tulee yhteensä 6 / puoli.

You can order this Vendia-wood in pre-set dimensions to help you with your project so we selected the length to allow us to have every plank as one individual piece and we will have 6 planks per side.









Seuraavaksi alkaa painokaarien teko ja asennus...Hieno siitä tulee !!

Next up is the steam-bent frames...These will be built out of oak. It already looks charming !!

Ei kommentteja:

Lähetä kommentti